English
Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
فارسی
Polski
-
6. Stainless steel sand remover conebody lined with high strength ceramic The high-concentration slag remover uses the different specific gravity of fiber and impurities to separate impurities. The slurry enters the slag remover at a certain pressure from the feed tee and rotates at high speed. Due ...
-
The Whole Stainless Steel Reject Sortor Machine For Second Stage Of Coarse Pulp Cleaning In The Stock Preparation 1. Introduction Features: This machine is mainly used for the treatment of tailings in the screening section of the waste paper system. The incoming pulp concentration is about 1-3%, and ...
-
Oscillating sieve plate screen in the carton paper pulp making system Self-cleaning vibrating frame flat screen is a device used by pulp and paper mills to screen pulp and improve pulp quality. This equipment is suitable for the screening of various pulps such as wood pulp, straw pulp, waste paper ...
-
1. High frequency vibrating screen for the waste paper pulp cleaning Self-cleaning vibrating frame flat screen is a device used by pulp and paper mills to screen pulp and improve pulp quality. This equipment is suitable for the screening of various pulps such as wood pulp, straw pulp, waste paper ...
-
4. Rejects seperator screen plate made by stainless steel material The rejects separator is an ideal equipment for tailings treatment in waste paper pulping system. Adopting closed operation, no splash of pulp water, good treatment effect, reducing fiber loss, and low slag disposal cost. It is a ...
-
1.8m2 vibratin screen for removing the light impurities of the paper pulp For pulp screening and purification. The film and other coarse impurities in the coarse pulp are screened out by frequency vibration, and the good pulp enters the next process through the sieve plate. The machine has the ...
-
Type600 stainless steel fiber separator for the pulp cleaning The fiber separator is a screening and pulping equipment with a combination of disintegration, separation and screening functions to remove various impurities in the waste paper raw materials by utilizing the specific gravity difference ...
-
Vertical wood pulp board breaking and pulping machine for the printing paper / tissue paper This equipment is a vertical structure, which is mainly composed of a trough, a rotor, a transmission part, a pulp tray, a bracket and other parts. The rotor device is composed of a rotor and a bearing ...
You Might Be Interested In
